Pages

The AT-99 “Scorpion” Gunship -Avatar 1:48

It was built for use on Earth as terrorists and insurgents began gaining access to EMP weaponry to counter drones and other combat machines, whose combat hulls and external electronics were hardened against EMP weaponry, but the "soft" CPU remained vulnerable, short-circuiting and leaving the drone both harmless and helpless. The RDA realized it needed a manned attack craft to negate the obvious disadvantages that would come with the short-circuiting of a drone's CPU, in that a human would remain unaffected by EMP weaponry, while the Scorpion's hardened hull would remain steadfast and flying.

Navigation and imaging

FLIR, radar, IFF, no active flux shielding.

Propulsion

Dual co-axial ducted-fan rotor systems with a total of four 3-bladed prop-rotors. Twin Magnussen KE-76 turbine generators driving counter-rotating annular ceramic motors. This gives the scorpion an effective combat range of 800 kilometers at 100 mp/h cruise or 140 VNE (in pandoran atmosphere).

Weaponry

The gunships lack the basic cargo-carrying capacity and side-door guns of the Samson, but more than compensate for this with superior frontal firepower, while not lacking in the Samson's impressive speed and maneuverability.
It is armed with four gimbal-mounted .50 caliber guns with 700 rounds per minute cyclic rate of fire as close range primary weapons. The Scorpion has two pair of stub-wing pylons to carry its armament. Scorpion carries 190 TK-411 WAFAR (Wrap-Around Fin Aerial Rocket) in ten 19-tube rocket launchers. The use of the rocket varies according to the warhead that can range from tactical applications to impact-based sensor systems. Eight Hawkeye HELLFIRE (Helicopter Launched Fire-and-forget) are used to engage air-to-air targets in conjunction with the nose-mounted sensor suite.
Weapons fire is constrained by an IFF (Identification Friend/Foe) Lockout system, which prevents friendly fire incidents in complex engagements with multiple aircraft and targets. Essentially the gun refuses to fire if the projected probability cone of a friendly vehicle’s flight path will put it in the trajectory of the bullet downrange. All air vehicles in Pandoran service can track each other in a battle theater in real time, using IFF beacons, and this data is integrated into the weapons systems via IFF Lockout.

Trivia

  • The Scorpion fills the role of heavily-armored VTOL weapons platform, similar to the Mil-24 Hind and AH-64 Apache.
  • The Scorpion has a similar design to the UNSC Hornet VTOL gunship in Halo 3.
james-camerons-avatar.wikia.com
WIP:plan 2D

I haven't found the 3view yet, so jump into 2D plan, from specification and give some adjustment, more progress...

WIP testbuild:tail and cockpit
engine assembly
engine and rocket container

cockpit glass from plastic tapeuse small wire to fix position after glue
























price :US $3
buy now here
please give some note the model name in paypal transaction and choose "send as give/friends" option

you can have it  here



79 comments:

  1. I appreciate the work of all people who share information with others.

    ReplyDelete
  2. om ini link download na ad g???? kpengen neh......

    ReplyDelete
  3. masih testbuild bro, udah jadi sih tapi perlu di revisi dulu masih banyak yg salah.
    tks

    ReplyDelete
  4. jadi pengen berguru.....:D

    -rino-

    ReplyDelete
  5. @rino
    lo kira gw drunken master??? wkwkwkwk

    ReplyDelete
  6. great ship !! great work !!
    it is posible another avatar ship or character ?

    go on your great works !!

    ReplyDelete
  7. @ELSOCRAFT
    thanks friend, one of my friend request the AMP suit but I can't promise,,lol
    @Didier Bretin
    anytime friend

    ReplyDelete
  8. That is quite awesome. Nice work.

    ReplyDelete
  9. I'm so glad I found you're blog and your work. It's fantastic and I really appreciate it. I will deffinitely build many of your models and may try and create a few of my own.

    ReplyDelete
  10. @Geahk Burchill
    thanks man, hope we can share along he way

    ReplyDelete
  11. Very Good work!! Thanks alot and congrats!!!

    ReplyDelete
  12. @Alain and Werter
    thanks man...

    ReplyDelete
  13. Great Model! Great job!
    Thanks :)

    ReplyDelete
  14. Great Model, I especially like that clear tape trick for the cockpit, real clever. Are you planning any more vehicles from Avatar? This model should look good next to the Aliens paper models I have from another site. I uncompressed the file and found that it is in PDF format, this means that anyone wanting to add detail painting/texturing can easily do so using either Adobe Photoshop or Adobe Photoshop Elements, both of which can open and print PDF files. You can find training for Adobe Photoshop and Adobe Photoshop Elements at www.howtogurus.com

    ReplyDelete
  15. @all
    thanks for the feedback
    @biff
    God bless you too...

    ReplyDelete
  16. Cool! Do you have a instruction sheet to build this?

    ReplyDelete
  17. I've built this model, and really enjoyed it. Good job! You can see mine at:

    http://www.konradus.com/forum/read.php?f=1&i=167944&t=167493&page=1

    ReplyDelete
  18. wooow...nice job...thank you for sharing with us
    regards,

    ReplyDelete
  19. This scorpion model is simply awesome. However, I am having a major problem trying to download this file.

    I keep getting a message that the file an not be open because it is either a not supported file type or because the file is damaged.

    Could you please help me out? Thank you. = )

    ReplyDelete
  20. If you having trouble for downloading the file, please send me your email I will reply ASAP.
    regards,

    ReplyDelete
  21. Great Model, thank you for sharing! Nice Work! :)

    A sugestion: What you think about Valkyrie TAV too?

    Congratulations, again!

    ReplyDelete
  22. @Rogerio
    thanks friend...the Valkyrie TAV wooowww..maybe later...

    ReplyDelete
  23. you done a fantastic job !! Alot of skill was placed in creating this. If you do not mind can you email me what software you are using to creat this model. Im trying diff softwares to create but finding I m in a slump trying to get to that point. All you help would be appreciate. My email is as follows Gregg: night_rider9605@yahoo.com I would really appreciate any and all help I could get to get a easier and more simpler program so as I could make various models and post them here for people as well Thank You So much Gregg

    ReplyDelete
  24. @Gregg
    thanks for your feedback, I'm using 3dsMAX 7 for modeling and V-ray plugins for rendering.You can purchase it at your local software house.

    ReplyDelete
  25. Great work!

    are you planning for the Samson?

    ReplyDelete
  26. if you could create the bigger Dragon Assault Ship, it would be great,
    please if you do make it also 1:48.
    would fit great with the AT-99

    Just as the AT-99 “Scorpion” Gunship
    thanks for this great model,

    Irayo, ma tsmukan,
    i hope to see some new models from you.

    ReplyDelete
  27. @Aujinz
    I can't promise
    @Sebastiaan
    I'm having trouble with the 3view, you can contact me if you found it..

    ReplyDelete
  28. what about 1:72 scale? I am plastic modeler and I work exclusively in 72.

    ReplyDelete
  29. yo is it possible that you could post the 3dsmax model? I want to make a model of this, stick a couple of motors, servos, and a controller together to make it fly. I can't exactly do this with a paper model, but I might be able to 3d print the thing. I'll send you a vid of the final product if/when I finish it!

    ReplyDelete
  30. Just make a SB paper model and fill it with epoxy glue, then paint. I'll do it in that way.

    btw: what about 1:72 scale comment is mine, I've rescaled it myself now.

    ReplyDelete
  31. @cawa
    wow...nice work friend that's very small size

    ReplyDelete
  32. horst.ritz2908@t-online.deMay 15, 2010 at 8:40 AM

    very nice work
    do you have a special modeler for autocad for doing this and can we share autocad projects maybe to refine the model

    ReplyDelete
  33. @horst.ritz2908
    thanks friend, the whole progress include autocad and 3d model, I did it by myself.And maybe we can work together

    ReplyDelete
  34. awsome model got any others from the avatar movie

    ReplyDelete
  35. wow keren abis dong................... kalo ada lagi gua sangat sangat mau....

    ReplyDelete
  36. wow u must be my guru

    ReplyDelete
  37. thanks bro..hemmm guru..ga mau ah diledekin mulu ama muridnya..wkwkwk

    ReplyDelete
  38. Very good job, thanks for sharing !

    I realise some models too but yours are awesome !

    ReplyDelete
  39. I downloaded the 1/38 pdf file and it seems to have the parts uncoloured. Is it supposed to be like this?

    ReplyDelete
  40. yup I made two version, the one with color and blank, with purpose you can modified your own color

    ReplyDelete
  41. Worth sharing this information. Good Work computer science degree | doctoral degree

    ReplyDelete
  42. Could you share the 3d model you made? I would love to do this in Pepakura

    ReplyDelete
  43. @nung
    send me your email dude, here
    tekz_8@yahoo.com

    ReplyDelete
  44. its seems to be very deadly helicopter
    i saw some videos about apatchi
    but its very awesome

    hcg diet

    ReplyDelete
  45. Mooi werk zeg
    Hier en daar wat bij werken
    bedoel motor aandrijving bij props
    is niet naar het hart van de machine gericht
    op 5 foto's

    ReplyDelete
  46. awsome model got any others from the avatar movie

    ReplyDelete
  47. GRACIAS POR LOS PLANOS.
    :)

    ReplyDelete
  48. Looks great! If you'd be comfortable sharing your 3ds Max model, it would be awesome. I've been searching the web for a decent Scorpion mesh. Thank you!

    ReplyDelete
  49. Very interesting concept design for an attack craft helicopter. Is this based off a design of an actual helicopter in the US military or from a science fiction game or movie? I wonder if military strategy in today's world could use such a weapon?

    ReplyDelete
  50. @David
    sorry dude, my PC is crash some of data was lost...suck...
    @Medical Alert Necklace
    it came from the Avatar movie, base on science fiction

    ReplyDelete
  51. I think it's hard-core!! Very good job, thanks for sharing! Check this out: oakley flak jacket

    ReplyDelete
  52. There are two things my boys really like. One is weapons the other - flowers. Seems something to keep them busy with.

    ReplyDelete
  53. @FM
    thanks friend
    @ok batteries
    hahaha keep the fun

    ReplyDelete
  54. interesting article. i love the pictures you have provided, definitely gives a detailed look! great post.

    ReplyDelete
  55. This blog is perfect for me. This is such a wonderful useful resource that you'll be providing. You got so many points here, that's why i love reading your post. Thank you so much. .

    ReplyDelete
  56. This looks absolutely perfect. All these tinny details are made with lot of background knowledge. I like it a lot. This was a useful post and I think it is rather easy to see from the other comments as well that this post is well written and useful. ...thanks for sharing…..

    ReplyDelete
  57. Is that Bostick or Evo-stick you are using ?
    Great models and I want to know what holds !!!

    ReplyDelete
  58. It was such a great opportunity to visit this site,you can gain new interesting topics thanks for this one,really a great job

    ReplyDelete
  59. how do you kno which piece goes where? are there instructions?

    ReplyDelete
  60. jenius lu bro... anak pak habibi ya? :D

    ReplyDelete
  61. bukan gan, gua anak babe gw..:p

    ReplyDelete
  62. suggest c21 dragon assault ship.i like it.hope u can create the model.

    ReplyDelete
  63. hope can get drahon ship paper model

    ReplyDelete
  64. só tá faltando mesmo alguém fazer um heliporto de papercraft.
    não encontrei em lugar nenhum quer dizer que ainda não foi inventado.

    ReplyDelete
  65. Gran nave¡¡¡¡¡ gracias por compartir esta nave estoy ahora armandola.

    ReplyDelete
  66. Hola baje la plantilla pero no me deja ver con que programa puedo verlo???

    ReplyDelete
  67. como descargo estas plantillas amigos

    ReplyDelete
  68. to all my friend, it would be nice if we use english or indonesian language.
    thank you

    ReplyDelete
  69. Just attempted to download the 1/38 version of the model. I'm getting a corrupt archive. The 1/48 version is fine.

    ReplyDelete
  70. Just attempted to download the 1/38 version of the model. I'm getting a corrupt archive. The 1/48 version is fine.

    ReplyDelete
  71. The 1/38th file is corrupt.
    The other files are OK.

    ReplyDelete
  72. thank you for models, all of them.
    i hope you are will and just taking time off to do other interesting things.

    ReplyDelete
  73. 1/38th file is still corrupt. How can I get a good version?

    ReplyDelete